Industrial board repair
Control boards and PLCs: micro-soldering, an alternative to replacing the whole module.
// For industry
ASMPT/SIPLACE SMT lines,
ASMPT/SIPLACE SMT lines,
managed by someone who knows them inside out.
Installation, maintenance, troubleshooting and optimisation of electronic production lines. ASMPT certification courses, almost all taken at ASMPT's site in Munich.
The founder has completed ASMPT certification courses
In the field since 2021
Service across Italy
ElectrONIK Lab is an independent technician and is not part of ASMPT. SIPLACE and DEK are trademarks of ASMPT.
01 Interactive experience
Explore the SMT line
A 3D journey inside the Surface-Mount line: from the placement machine to the software that runs it. Drag, rotate and explore.
02 What we do
Services for electronics manufacturing
0107
08
Placement head and gantry maintenance
Scheduled maintenance of SIPLACE TwinHead, CPP and CP20 heads (every CP20 version, CP20P2 included) and of the gantries that move them: a short service every 3 months and a full service every 6 months, with downtime agreed in advance.
See the service → 02Head and gantry troubleshooting
Structured fault diagnosis on TwinHead, CPP and CP20 heads (every CP20 version) and on the gantries: we start remotely, from the machine's bug reports, and come on site when needed. Vacuum, encoders, Z and star axes, failed pick-ups, component recognition.
See the service → 03Machine maintenance: Pick & Place, DEK printers and SPI
Preventive maintenance on SIPLACE SX, X and TX, DEK printers, ASYS handling systems and laser markers; repairs and troubleshooting on SIPLACE machines and software; technical support and installation on SPI Process Lens.
See the service → 04Installation, shop-floor IT and ASMPT software
Machine installation, line relocations and software configuration. ASMPT software: WORKS and SIPLACE Pro, Setup Center and WORKS Preparation; ASM OIB configuration and support for MES integration. Traceability, line monitoring, production data and OEE and KPI analysis. Shop-floor IT: network, Windows Server, backups and SQL Server.
See the service → 05SIPLACE Pro programming support
We work alongside your team on a new program or one to optimise, until it goes into production: paths, line balancing, feeders, shapes from real measurements and the library. Also remote, without stopping production.
See the service → 06Operator and maintenance staff training
Training for operators and maintenance staff, directly on your line. There is no fixed number of hours: we work alongside your team until it can produce its first board on its own.
See the service →Second opinion and pre-purchase check
An independent check of the condition of SIPLACE machines and lines: before you buy a machine, even a used one, or when you want a second opinion on maintenance or a fault. We give you a written report of what we found.
See the service →Programming support, software configuration, shop-floor IT and an initial diagnosis of head and gantry faults can also be done remotely. How it works →
03 Remote support
Remote SMT / SIPLACE support
An SMT line is a major investment, and every hour of downtime is costly. Many tasks don't need a site visit: over a secure connection agreed with your IT, we handle them remotely, including work alongside your team on SIPLACE Pro programs and component shapes, software configuration, shop-floor IT and an initial diagnosis of head and gantry faults from the machine's bug reports. Scheduled maintenance, repairs and commissioning are done on site.
Three support formulas
Single intervention
One specific problem: analysis, remote intervention, final report. No lock-in, no subscription.
Ongoing support
A monthly package of hours for programming support, optimisation and operational support, with priority response. It also includes scheduled on-site maintenance; spare parts excluded.
Technical partner
Remote support and scheduled on-site visits, from the machine to the department software. For those without an in-house service engineer.
04 Technologies & platforms
Technologies and platforms
SIPLACE SX / X / TXWORKS Software SuiteSIPLACE Pro
ASM OIBSetup CenterSPI Process Lens
DEK printersASYS handlingLaser Marker
PLCSQL ServerWindows ServerTraceabilityIT/OTRemote support
05 Further reading
How we work, in detail
Technical guides written from the field, not compiled from manuals: they show how we tackle a problem before you even get in touch.
01
ASM OIB: what it is and what it does
The broker between the machines and the information systems: architecture, the IPC-CFX and IPC-Hermes standards, use cases.
Read the guide → 02SIPLACE Pro and component shapes
How to build a shape from the real measurements of the component and the tape, to reduce recognition errors.
Read the guide → 03Troubleshooting SIPLACE errors
The most frequent errors on a SIPLACE line, their typical causes and how to get to the root of the problem.
Read the guide → 04Line maintenance
Structured maintenance on pick & place machines: what to check, how often and how it affects OEE.
Read the guide → 05Reducing machine downtime
Where unplanned downtime comes from and which interventions reduce it.
Read the guide → 06IT/OT integration and MES
Getting the shop-floor machines and the business systems talking: segmentation, production data, end-to-end traceability.
Read the guide →
06 Who looks after you
Hasibul Islam Mozumder
Since 2021 I've worked on ASMPT/SIPLACE lines: for four years as a technician at a service company, and now with ElectrONIK Lab. I handle machine installation, line relocations and line software. ASMPT certification courses, almost all taken at ASMPT's site in Munich.
ElectrONIK Lab is an independent technician and is not part of ASMPT. SIPLACE and DEK are trademarks of ASMPT.
Get to know my story →
07 Frequently asked questions
FAQ
Do you have direct experience with ASMPT machines?
Yes. The founder has worked since 2021 on ASMPT/SIPLACE SMT lines in real production environments, with ASMPT certification courses, almost all taken at ASMPT's site in Munich.
Are you an ASMPT-authorised service centre?
No. ElectrONIK Lab is an independent business: it is not an ASMPT-authorised service centre and is not affiliated with ASMPT. We work on SIPLACE lines with the hands-on production experience gained since 2021.
Do you travel to customer sites?
Yes, across the whole country, on site or remotely depending on the type of intervention.
How much notice do you need?
For scheduled maintenance, at least one month for a single job and 2–3 months for periodic maintenance. For a breakdown, write to us straight away: by the end of the first call you already have some initial guidance, and for heads and gantries diagnosis starts remotely, from the machine's bug reports.
Do you work on machines still under warranty?
It depends on the manufacturer's terms: for new machines still under warranty, we go through those terms with you before starting any work. Every job starts with a first conversation and an agreed plan.
Do you also repair industrial control boards?
Yes, control boards and PLCs, with micro-soldering: often an alternative to replacing the whole module.
Do you train our staff?
Yes: training for operators and maintenance staff on SIPLACE, DEK and WORKS, directly on your line. There is no fixed number of hours: we work alongside your team until it can produce its first board on its own.
Do you service DLM heads?
We assess each case individually. From the DLM3 onwards, dedicated jigs are needed that we do not currently have: that is why DLM heads are not among those covered by our scheduled maintenance.
Do you calibrate Process Lens SPI systems?
Not at the moment: calibration requires the dedicated calibration kit, which is not currently part of our service. On Process Lens and Process Lens HD SPI systems we provide technical support and help with installation, almost always on site.
What can be solved remotely on a SIPLACE line?
The software and configuration side: work alongside your team on SIPLACE Pro programs, component shapes and the library, software configuration, traceability and shop-floor IT; Setup Center and WORKS, ASM OIB configuration and support for MES integration; OEE, KPI and downtime analysis. Diagnosing a head or gantry fault also starts remotely, from the machine's bug reports; the repair is done on site, and we organise the visit ourselves.
How does remote support work in practice?
We agree a secure access channel with your IT (VPN or supervised remote session), analyse the problem, intervene and close with a report of what was done. No permanent software installed without agreement.
What is ASM OIB integration and what is it for?
ASM OIB is ASMPT's integration platform: it links the ASM software packages and carries data from SIPLACE lines to the MES or factory system. We handle ASM OIB configuration and support the integration of SIPLACE lines with the MES: traceability, line monitoring and production data.
Do you offer ongoing support contracts?
Yes, three formulas: a single intervention; ongoing support with monthly hours and priority response, which also includes scheduled on-site maintenance, spare parts excluded; or the Technical partner formula, with remote support and scheduled on-site visits. We recommend the right formula after a first introductory call.
Has your line stopped or does it need optimising?
Tell us the situation: we work on site, on the road or remotely.
08 Request support
Line down? Let's talk now.
Describe the machine and the issue: we'll reply with availability, intervention timing and a reference number.
Need support?
Email us or fill in the form: you'll speak directly with the technician handling your case — not a call centre.
Meda (MB), Lombardy — service across Italy
Mon – Fri / 9:00 – 19:00 · Sat / 9:00 – 18:00
ElectrONIK Lab is an independent business: it is not an ASMPT-authorised service centre and is not affiliated with ASMPT. SIPLACE and DEK are trademarks of ASMPT; the other trademarks mentioned belong to their respective owners.